## Enabling and Visualizing Point Cloud in ROS 2

This section demonstrates how to enable point cloud data output from the camera node and visualize it using RViz2.

### Enabling Depth Point Cloud

#### Command to Enable Depth Point Cloud

To activate the point cloud data stream for depth information, use the following command:

```bash
ros2 launch orbbec_camera gemini_330_series.launch.py enable_point_cloud:=true
```

#### Visualizing Depth Point Cloud in RViz2

After running the above command, perform the following steps to visualize the depth point cloud:

1. Open RViz2.
2. Add a `PointCloud2` display.
3. Select the `/camera/depth/points` topic for visualization.
4. Set the fixed frame to `camera_link` to properly align the data.

- **Example Visualization**

Here is what the depth point cloud might look like in RViz2:

![Depth Point Cloud Visualization](../image/point_cloud/image5.jpg)

### Enabling Colored Point Cloud

#### Command to Enable Colored Point Cloud

To enable the colored point cloud feature, enter the following command:

```bash
ros2 launch orbbec_camera gemini_330_series.launch.py enable_colored_point_cloud:=true
```

#### Visualizing Colored Point Cloud in RViz2

To visualize the colored point cloud data:

1. Launch RViz2 following the command execution.
2. Add a `PointCloud2` display panel.
3. Choose the `/camera/depth_registered/points` topic from the list.
4. Ensure the fixed frame is set to `camera_link`.

- **Example Visualization**

The result of the colored point cloud in RViz2 should look similar to this:

![Colored Point Cloud Visualization](../image/point_cloud/image6.jpg)